Reinforcing Bars

The company's rebar is regarded as a premium quality product due to the sourcing of prime quality billets. Annual production capacity is 1.1 MTPA.

Specification	Rebar will be manufactured as per BS4449; 2005
Grade	Grade B500B

This British Standard specifies requirements for ribbed weldable reinforcing steel used for the reinforcement of concrete structures. The standard covers steel delivered in the form of bars and coils. The standard contains provisions for B500B steel grade of 500 MPa characteristic yield strength.

The weldability requirements for all grades of steel are specified in terms of the chemical composition, and in particular the carbon equivalent value. Reinforcing steel is a steel product with a circular or practically circular cross-section which is suitable for the reinforcement of concrete.

General
Ribbed steels are characterized by the dimensions, number and configuration of transverse and longitudinal ribs. Bars, coils and decoiled products shall have two or more rows of transverse ribs uniformly distributed around the perimeter. Within each row the ribs shall be uniformly spaced. Longitudinal ribs can be present or not.
Bar — Identification of the manufacturer Each reinforcing steel shall bear on one rib row, a mark identifying the works. This mark shall be repeated at an interval of not more than 1.5 m.

Identification requirements

• Bar — Identification of the manufacturer
  • Each reinforcing steel shall bear on one rib row, a mark identifying the works. This mark shall be repeated at an interval of not more than 1.5 m.
• Coil
  • Coil shall be identified in the same manner as bar.

For more information about the product, call the number above or write through the feedback form.