Wire Rod and Rebar in Coils

The company’s carbon steel wire rod, which is produced by a high speed (102 m/sec) wire rod mill. Wire rods are manufactured equivalent to SAE grades.

Product Size	Wire rods - 5.5, 6, 6.5, 7, 8, 9, 10, 11, 12, 14, 16 mm Rebar in coil - 8,10, 12, 14, 16 mm
Grade	Wire rod - SAE 1006, SAE1008, SAE1012, SAE1015, SAE1018 Rebar in Coil - BS4449:2005, Grade B500B
Coil weight - (kg)	2000 - 2100
Coil identification	Each coil will have tag with unique coil number and heat number.

This standard covers the general requirements for carbon steel wire rods and uncoated coarse round wire in coils.
In case of conflict, the requirements in the purchase order, on the drawing, in the individual specification, and in this general specification shall prevail in the sequence named.
Wire rods - rods that are hot rolled from billets to an approximate round cross section into coils of one continuous length. Rods are not comparable to hot-rolled bars in accuracy of cross section or surface finish and as a semifinished product are intended primarily for the manufacture of wire.

Ordering Information
Orders for hot-rolled wire rods under this standard should include the following information:

• Quantity
• Name of material (wire rods)
• Diameter
• Chemical composition grade no.
• Packaging
• ASTM designation and date of issue
• Special requirements, if any

Workmanship, Finish, and Appearance
The wire rod shall be free of detrimental surface imperfections, tangles, and sharp kinks.

Packaging and Package Marking
A tag shall be securely attached to each coil or bundle and shall be marked with the size, ASTM specification number, heat or cast number, grade number, and name or mark of the manufacturer.

					%
					C		Mn		P	S	Si		Cr	Ni	Cu	AI	N
					Min	Max	Min	Max	Max	Max	Min	Max	Max	Max	Max	Max	Max
Wire ASTM A 510	SAE 1008		USI		0,05	0,10	0,25	0,30	0,015	0,010	0,10	0,20	0,10	0,10	0,10	0,02	0,008
Wire ASTM A 510	SAE 1012		USI		0,10	0,15	0,30	0,60	0,015	0,010	0,10	0,20	0,10	0,10	0,10	0,02	0,008

For more information about the product, call the number above or write through the feedback form.